IDEC MICROSmart FC6A Series User Manual

FC6A S ERIES MICROS MART U SER ’ S M ANUAL FC9Y-B1722 5-41
5: F UNCTIONS AND S ETTINGS
Programming WindLDR
To use frequency measurement, you must configure the Function Area Settings in WindLDR and download the user program to
the FC6A Series MICROSmart. Frequency measurements will start when you download the user program and set the FC6A Series
MICROSmart to run.
1. From the WindLDR menu bar, select Configuration > Input Configuration.
The Function Area Settings dialog box is displayed.
2. Specify Frequency Measurement for the group to use frequency measurement.
3. Click OK.
This concludes configuring the settings.

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English