IDEC MICROSmart FC6A Series User Manual

6: D EVICES
6-14 FC6A S ERIES MICROS MART U SER ’ S M ANUAL FC9Y-B1722
M8340 = User communication receive instruction being executed on client connection 13
M8341 = User communication receive instruction being executed on client connection 14
M8342 = User communication receive instruction being executed on client connection 15
M8343 = User communication receive instruction being executed on client connection 16
■ M8211: HMI Module Send E-mail Server Settings Initialization
When M8211 is turned on, the settings for the send E-mail server on the HMI-Ethernet port are initialized.
■ M8212 to M8221, M8345 to M8354: Connection Status
While connected to a network device via the maintenance communication server, user communication server/client, or Modbus TCP
server/client, the connection status is turned on. While not connected to a network device, the connection status is turned off.
M8212 = Connection 1
M8213 = Connection 2
M8214 = Connection 3
M8215 = Connection 4
M8216 = Connection 5
M8217 = Connection 6
M8220 = Connection 7
M8221 = Connection 8
M8345 = Connection 9
M8346 = Connection 10
M8347 = Connection 11
M8350 = Connection 12
M8351 = Connection 13
M8352 = Connection 14
M8353 = Connection 15
M8354 = Connection 16
■ M8222 to M8231, M8355 to M8364: Disconnect User Communication Connection
When connected to a remote host via user communication, the corresponding connection is disconnected when M8222 to
M8231 is turned on.
M8222 = Connection 1
M8223 = Connection 2
M8224 = Connection 3
M8225 = Connection 4
M8226 = Connection 5
M8227 = Connection 6
M8230 = Connection 7
M8231 = Connection 8
M8355 = Connection 9
M8356 = Connection 10
M8357 = Connection 11
M8360 = Connection 12
M8361 = Connection 13
M8362 = Connection 14
M8363 = Connection 15
M8364 = Connection 16
These relays are enabled only when a user communication client is used.
■ M8232: HMI Module Connection Information Reference Connection Status
M8232 is turned on when there is a connection with the connection number specified by D8429. M8232 is turned off when there
is no connection.
■ M8250: Download from SD Memory Card Execution Flag
When M8250 is turned on, a ZLD file is downloaded from the SD memory card. The file that will be downloaded is the ZLD file
specified in the autoexec.ini file.
■ M8251: Upload to SD Memory Card Execution Flag
When M8251 is turned on, a ZLD file is uploaded to the SD memory card.
A ZLD file is created with the file name specified in the autoexec.ini file.

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English