FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 7-11
7: HMI F
UNCTION
Clearing TP (Timer Preset Values) and CP (Counter Preset Values)
1. In step 5 of "Reflecting TP (Timer Preset Values) and CP (Counter Preset Values) in the User Program" on page 7-10, select
Clear with the (up) and (down) buttons, and press the (OK) button.
The changes made to the timer and counter preset values are deleted. The preset values of the user program in the ROM remain
as they are before those values are modified. The device values return to the values before they are modified.
Note: The preset values can also be reflected to the user program in ROM using WindLDR. Select Online > Monitor > Start Monitor. Select
Online > PLC > Status to display the PLC Status dialog box, and click the Confirm button under TIM/CNT Change Status. Once preset values
are confirmed, they cannot be restored to their previous values, even if they are cleared.
T/C Change Status:
T/C is changed
Clear
Confirm
To Next Page
Loading...
Need help?
General
