IDEC MICROSmart FC6A Series User Manual

11: SD M EMORY C ARD
11-16 FC6A S ERIES MICROS MART U SER ’ S M ANUAL FC9Y-B1722
Programming WindLDR
The recipe settings are configured with the following operation procedure.
1. On the View tab, in the Work Space group, click Project Window.
The Project Window is displayed in the left portion of the screen.
2. Double-click Recipe.
Recipe Editor starts.
 If no blocks are registered, block number 1 recipe settings are created and can be edited.
 If blocks have already been registered, recipe settings for the lowest block number that has not been registered are created and can be
edited.
 Double-click a registered block number and the recipe settings for that block number can be edited.
Note: To delete recipe settings that have been created, right-click on the block number and click Delete on the menu.
3. Configure the recipe setting parameters.
The recipe settings are saved when the project data is saved.
This concludes configuring the recipe settings.

IDEC MICROSmart FC6A Series Specifications

General

Brand	IDEC
Model	MICROSmart FC6A Series
Category	Computer Hardware
Language	English