Pre-Installation Checklists
Before you begin to install the iDig, make sure you’ve got everything you need to successfully
complete the installation along with checking your equipment and your working area.
Prestart Checklist #1 – Items to have on hand to assist with installation
✓ Tape measure
✓ Make sure the unit of measurement selected for the system matches your equipment on
hand
✓ Magnetic plumb bob or magnetic hooks
✓ String line
✓ Clean rags
✓ Brake cleaning fluid
✓ Tripod – preferably an elevating variety
✓ Window cleaner
✓ Rotating laser and hand held receiver
✓ Make sure your sensors are charged
✓ Grade rod
✓ Cable ties, conduit and sticky cable mounts for a clean cab
4
To Next Page