Part 2 - Conguration
88
Storage
Indicates each disk's status.
Congure Disk Bad and Disk Temperature settings under
Setup > System > Monitoring.
Disk Bad
Not
Formatted
A disk that has never
been used before.
Good
● Disk performing
normally.
● If the HDD is partially
damaged, indicates
the bad sector
percentage.
Error
● If the HDD's bad
sector ratio is higher
than as designated
by the user.
● Generates a system
event.
Temperature
N/A
Unable to detect the
disk's temperature.
Good
Operating within
normal temperature
range.
Bad
● Disk temperature
higher than as
designated by the
user.
● Generates a system
event.
S.M.A.R.T.
N/A
A disk that does not
support S.M.A.R.T.
Good
A disk with normal
S.M.A.R.T. status.
Bad
A disk with abnormal
S.M.A.R.T. status.
Possibility of damage
within 24 hours.
• Check all data's storage time information under
Recording Data.
• Clicking the temperature, S.M.A.R.T can check the
each HDD information.
To Next Page
Loading...
