23
IDS LCD Keypad User Manual 700-292-01C Issued March 2009
8.3.10 Option 9 - Delete User Code (Code known)
Hold [*] + [Master Code] + [*] + [9] + [*] + [User Code to be deleted] + [*]
1. Enter the User Program Mode as per steps 1 - 4 of (8.2).
2. IDS 816 Panel
When prompted for the 'Menu Option' press the [9] key followed by the [*] key to select
programmable option 9.
IDS 1632 & IDS 1224 Panels
Menu option 0 - 'Add User' is displayed on the LCD Screen by default. To select menu option 9 -
'Default Code', press the [9] key or alternatively use the [PANIC] or [MED] keys to scroll
through the list of programmable options until you reach Menu Option 9. Press the [*] to confirm
your selection.
3. The ARM LED will flash.
4. When prompted for the 'User Code' enter the [USER CODE] to be deleted followed by the [*]
key. 'Deleting' the code in slot one will reprogram it to 1234.
5. Further codes may be deleted by repeating Step 4 above.
6. After deleting the final code, press the [#] key to exit User Program Mode.
8.3.11 Option 10 - Delete a User Code ("Slot" known)
Hold [*] + [Master Code] + [*] + [1] + [0] + [*] + [User Slot] + [*]
1. Enter the User Program Mode as per steps 1 - 4 of (8.2).
2. IDS 816 Panel
When prompted for the 'Menu Option' press the [1] key followed by the [0] key to select
programmable option 10.
IDS 1632 & IDS 1224 Panels
Menu option 0 - 'Add User' is displayed on the LCD Screen by default. To select menu option 10 -
'Default Slot', press the [1] key followed by the [0] or alternatively use the [PANIC] or [MED]
keys to scroll through the list of programmable options until you reach Menu Option 10. Press the
[*] to confirm your selection.
3. The ARM indicator flashes and the LCD prompt reads 'Enter User Slot'.
4. When prompted for the 'User Slot' enter the [SLOT NUMBER] for the User Code you wish to
delete followed by the [*] key.
5. Further User Codes may be deleted by repeating Step 4.
6. After deleting the final code, press the [#] key to exit User Program Mode.
8.3.12 Option 11 - Viewing a User Name
Hold [*] + [Master Code] + [*] + [1] + [1] + [*] + [User Slot] + [*]
1. Enter the User Program Mode as per steps 1 - 4 of (8.2).
2. IDS 816 Panel
When prompted for the 'Menu Option' press the [1] key followed by the [1] key to select
programmable option 11.
IDS 1632 & IDS 1224 Panels
Menu option 0 - 'Add User' is displayed on the LCD Screen by default. To select menu option 11 -
'Slot Name', press the [1] key followed by the [1] or alternatively use the [PANIC] or [MED] keys
To Next Page
Loading...
Need help?
General
