30
IDS LCD Keypad User Manual 700-292-01C Issued March 2009
15. Output Control via a Keypad
NB:
Ensure that you have checked with your installer which outputs are used for radio reporting to
prevent the triggering of false alarms.
If the panel has been setup to control switching functions via its outputs, these can be controlled via the
keypad - e.g. turning lights on and off.
Hold down the [MODE] key and press [3] [*]. Any outputs that are currently set [ON] will be displayed
as 'Output No. Set' any outputs that are set [OFF] will be displayed as 'Output No. Clear'. One is able to
scroll through the Outputs by using the [PANIC] and [MED] keys.
To toggle the output status, enter [OUTPUT NUMBER] followed by [*]. Press [#] to exit User Program
Mode.
To Next Page
Loading...
