IDS LCD Digital Keypad

31
IDS LCD Keypad User Manual 700-292-01C Issued March 2009
Quick Reference User Guide
Description
Programming
Add a User Code
[*] [Master Code] [*] [0] [*] [New Code] [*]
Change a User Code
[*] [Master Code] [*] [2] [*] [Old Code] [*] [New Code] [*]
View a Slot Number
[*] [Master Code] [*] [3] [*] [User Code] [*]
View the Slot number via the zone LED‟s
Edit User Code Properties
[*] [Master Code] [*] [4] [*] [User Code] [*] [2,3 or 4] [*]
2 = Duress 3 = Arm to Disarm Code
4 = Global Arm/Disarm Code
Allocate a User Code to a Partition
[*] [Master Code] [*] [5] [*] [User Code] [*] [Partition
Number] [*] [#]
Teach a Remote to a User Code
[*] [Master Code] [*] [8] [*] [User Code] [*]
Press Tx Button
Delete a User Code by Code
[*] [Master Code] [*] [9] [*] [User Code] [*]
Delete a User Code by Slot Number
[*] [Master Code] [*] [10] [*] [Slot Number] [*]
Change Partitions
[Mode] [1] [*] [Partition Number] [*]
Select a Stay Profile
[Mode] [2] [*] [Profile Number] [*]
Program/Cancel Stay Zone
[3] [Zone Number] [*] [#]
Program/Cancel Buzz Zone
[4] [Zone Number] [*] [#]
Program/Cancel Chime Zone
[2] [Zone Number] [*] [#]
Quick Arm
[1]
Quick Stay
[5]
Stay Arm and Go
[6]
Bypassing/Un-bypassing a Zone
[9] [Zone Number] [*] [#]
Alarm Memory
[0] Displays zones violated.
View Trouble Conditions
[7] 1 = AC Mains Fail 2 = No Communication
3 = Phone Line 4 = Siren Tamper
5 = Low Battery 6 = Loss of Clock Timer
7 = Engineer Reset 8 = Box Tamper
10 = Tamper on Peripheral
11 = Comms. Failure to Peripheral Device
12 = Loss of Power to Peripheral Device