Setting Changesp.66
Output Time setting from 12.6.2 to 12.6.14 can be configured in the same way as 12.6.1 R
D1 ID OK Level 1 Output setting.
6.2 Output Setting for Reader#1 ID OK Level 2
This output time is applied for the users registered with Level#2 output.
6.3 Output Setting for Reader#1 ID OK Level 3
This output time is applied for the users registered with Level#3 output.
6.4 Output Setting for Reader#1 ID OK Level 4
This output time is applied for the users registered with Level#4 output.
6.5 Output Setting for Reader#1 ID Error
This output time is applied when a user that is not registered in Reader #1 attempts access.
6.6 Output Setting for Reader#1 T/S Error
This output time is applied when a user attempts access before or after the time assigned by
the applied time schedule.
6.7 Output Setting for Reader#1 APB Error
This Output Time is applied when a user who attempts access has violated the one-entry-on
e-exit rule of Anti-pass-back.
6.8 Output Setting for Reader#2 ID OK Level 1
This Output Time is applied for the users registered with Level#1 output.
6.9 Output Setting for Reader#2 ID OK Level 2
This Output Time is applied for the users registered with Level#2 output.
To Next Page
