IEI MiniMax 3 Installation/Programming Manual Section 3: Programming
Action Desired Press Details
Program Consecutive Users – Card
Only By Presenting Cards
53 # user type # start user # **
<present card> <present card> ...
User Types:
0 – Toggle
1 – Standard
3 – Lockout
4 – Extended
5 – Single Use
6 – Relock
7 - Emergency
Simply present one card after another.
Enable/Disable Users 56 # enable/disable # user location # **
Enable = 0
Disable = 1
Program Consecutive Users – Card
Only Without Presenting Cards
57 # number of users # user location #
card PIN * card pin *
“Number of Users” = total number of
cards to be entered; card PIN appears
on card; a facility code must be entered
first (see command 32, option # 4)
Delete Block of Consecutive Users
58 # start user # start user # number
of users * number of users *
Delete User user location # **
Erase Transaction Log 76 # 00000 # 00000 # **
Document #: 6055672, Rev 1.0 D1c Page 45 of 48
To Next Page
Loading...
Need help?
General