IEI MiniMax 3 Installation/Programming Manual Section 1: System Features and Specifications
Section 1: System Features and Specifications
The following section outlines the MiniMax 3 features, specifications and default settings.
1.1 System Features
Table 1: System Features
Feature Description/Details
Users 2000
Base Capacity Supports 1 Max 3 Module; Controls 1 Door
Additional Capability Network up to 64 doors with additional Max 3 modules
Communication Type
RS-485 Network; Connect via RS-232 to RS-485 Converter, USB to RS485 Converter
or LAN connection using SEG-M or SEG-1.
Audit Trail *2000 Event Transaction Log
Front End Support
Each Max 3 Module supports either two Wiegand or Secured Series front End readers
for IN/OUT operation.
Programming Max 3 Module supports keypad or PC programming
Auto-Unlock Time Zones
9:00 A.M. to 5:00 P.M. Monday-Friday
*Eight user definable time zones for auto-unlock or access control
*32 single day or block holidays
First-In Auto-Unlock Requires valid entry to initiate auto-unlock schedule.
Forced Door Alarm Relay/Timer
Alarm Zone Shunting Relay
Timed Egress Input
Non-Volatile EEPROM Memory
* Indicates feature available with PC software only.
Document #: 6055672, Rev 1.0 D1c Page 5 of 48
To Next Page
Loading...
Need help?
General