IFM Electronic Efector 300 - Explanation of Basic Settings Parameters

19
UK
Explanation basic settings (CFG)
FOU1 Behaviour of output 1 in case of an error
FOU2 Behaviour of output 2 in case of an error
dAP Measured value damping / damping constant in seconds
diS Update rate and orientation of the display
Uni�F Standard unit of measurement for volumetric flow
Uni�T Standard unit of measurement for temperature
SELd
Standard measuring unit of the display: volumetric flow value / medium
temperature
LFC Low flow cut-off
Fdir Direction of flow