IFM Electronic O1D155 - 10.1.2 Change from Menu Level 1 to Menu Level 2; 10.1.3 Electronic Lock

15
UK
10.1.2 Change from menu level 1 to menu level 2
► Press [MODE/ENTER] several times until
[EF] is displayed.



► Press [SET] briefly�
> The first parameter of the sub-menu is
displayed (here: [dr1])�



10.1.3 Electronic lock
The unit can be locked electronically to prevent unintentional settings� On delivery
the unit is not locked�
Locking
► Make sure that the unit is in the normal
operating mode�
► Keep [MODE/ENTER] + [SET] pressed
until [Loc] is displayed�
> The unit is locked�
[Loc] is displayed briefly if you try to change parameter values on the locked unit during
operation�
Unlocking
► Keep [MODE/ENTER] + [SET] pressed
until [uLoc] is displayed�
> The unit is unlocked�
Timeout
If no button is pressed for 15 s during the setting procedure, the unit returns to the
Run mode with unchanged values�