Ihse 474 Series - Status Upgrade Module USB 2.0

Draco KVM Extender
38 2014-04-15
3.7.6 Status Upgrade Module USB 2.0
The upgrade module USB 2.0 is fitted with a multi color LED on both sides
for overall status indication and with two further LEDs on the back side for
indication of the connection status.
CPU Module CON Module
12
3
12
3
12
3
12
3
Rear View Rear View
Pos. LED Status Description
Off Connection available 1
Failure LED
(green)
On or
Flashing
Connection failure (flashing for about
20 s following a connection failure)
Off No connection via interconnect cable 2
Status LED
(green)
On Connection available
LED 3: USB 2.0 Status
LED color Description
Red
Device ready
Green
Only connection available, no USB 2.0 signal
Green /
light blue
flashing
Connection available, no USB 2.0 device
connected
Light blue
Connection and USB 2.0 signal available
(operating status)
Pos: 54 /806-IHSE/ Installation/UEB _Installation @ 5\mod_12 78574971589_6.doc @ 41768 @ 1 @ 1