Ihse 474 Series - Parameters for CPU und con Units

Configuration
2014-04-15 53
5.5.3 Parameters for CPU und CON Units
You have to write the following parameters into the configuration file of
both CON Unit and CPU Unit.
Local switching
Parameter Function
BLANKSCR
Activate dark switching between local and
remote console by keyboard or mouse event
(only with HDMI extenders and local control by
an USB-HID CON upgrade module)
PRIVATEMODE
Activate switching of video and control between
local and remote console by keyboard
commands (only with HDMI extenders and local
control by an USB-HID CON upgrade module)
USB 2.0 embedded
Parameter Function
ENAUSB11
Activate USB 1.1 mode for USB 2.0 embedded
upgrade modules (only with USB 2.0 embedded
upgrade module)
Pos: 68 /806-IHSE/ Betrieb/UEB_Betr ieb @ 5\mod_127857761498 0_6.doc @ 41970 @ 1 @ 1