IKEA OSTVEDA - Page 19

English
19
- 
language has been set, “LANGUAGE” will be
displayed and a short sound will be heard.
- To exit the menu, press the “ON/OFF”
key.
“TABLETS”
“TABLETS” OPTION SETUP 5 SEC
This option enables optimal tablet usage (“3
in 1”/ “4 in 1”/ “5 in 1”, etc.). By pressing this
button, the set washing programme is changed,
in order to obtain optimum performance using
tablets or combined detergents; in addition, the
salt and rinse aid indicators are deactivated.
WARNING: Once selected, this option also
remains active (light on) for subsequent
washing cycles and can only be de-activated
.
This option is recommended when
using the RAPID programme, whose duration
will be extended to enable improved perfor-
mance from the detergent tablets.
- Switch on the dishwasher with the “ON/
OFF” button.
- Keep the “SETUP 5 SEC” button pressed for
about 5 sec.
- The “SETTINGS” message appears on the
display.
- By pressing the “PROGRAM SELECTION”
key you can select the successive parame-
ters to be adjusted.
- Select the “TABLETS” setting.
- 
selected parameter.
- Press the “PROGRAM SELECTION” but-
tons to choose the two settings:
“YES”
“NO”
- 
OK”
- 
light icon will turn on the display.
- 

- To exit the menu, press the “ON/OFF” key.
BUZZER SELECTIONS AND SETTINGS
The buzzer signal that sounds upon pressing the keys
used for selecting and setting washing functions and
options can be activated/deactivated as follows (it is
activated by default):
WARNING: The buzzer signal will always
remain active when the machine is switched

cycle or in the event of a problem or error
with the machine.
- Switch on the dishwasher with the “ON/
OFF” button.
- Keep the “SETUP 5 SEC” button pressed for
about 5 sec.
- The “SETTINGS” message appears on the
display.
- By pressing the “PROGRAM SELECTION”
key you can select the successive parame-
ters to be adjusted.
- Select the “BUZZER” setting.
- 
selected parameter.
- Press the “PROGRAM SELECTION” but-
tons to choose the two settings: “YES” “NO”.
- 
OK”.
- 
appear on the display and will scroll con-
tinuously.
- To exit the menu, press the “ON/OFF”
key.