ILLKO MDtest - Page 3

MDtest (100-140 V) - User’s Manual Contents
4.7.2 Enclosure (chassis) leakage current - I60601Touch . . . . . . . 36
4.7.3 Lead to ground (application part) leakage current - I60601Pat 37
4.7.4 Lead isolation – Mains on Applied Parts leakage current -
I60601MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.8 Other leakage currents . . . . . . . . . . . . . . . . . . . . . . . . . . 39
4.8.1 Alternative method - IaltEq . . . . . . . . . . . . . . . . . . . 39
4.8.2 PE current during operation – IdirEq / differential leakage
current - IdifEq . . . . . . . . . . . . . . . . . . . . . . . . . . 39
4.8.3 Enclosure leakage current - IdirTouch / IdifTouch . . . . . . . 41
4.9 Apparent power, mains voltage and current consumption - Power . . 43
4.9.1 Power, mains voltage and current consumption in test socket . 43
4.9.2 Measuring of power and current consumption by means of
current clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5 Database operations 45
5.1 Storing measurement data . . . . . . . . . . . . . . . . . . . . . . . . 45
5.2 The structure of the data memory . . . . . . . . . . . . . . . . . . . . 45
5.3 Entering characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5.4 Identification number of device under test (ID) . . . . . . . . . . . . . 46
5.5 Working with test results . . . . . . . . . . . . . . . . . . . . . . . . . 47
5.5.1 Viewing a list of tested DUTs . . . . . . . . . . . . . . . . . . 47
5.5.2 Searching for stored DUTs . . . . . . . . . . . . . . . . . . . . 48
5.5.3 Creating a new DUT file . . . . . . . . . . . . . . . . . . . . . 48
5.5.4 Deleting a DUT from the main memory . . . . . . . . . . . . 48
5.5.5 Modification of the ID number . . . . . . . . . . . . . . . . . . 49
5.5.6 Viewing measured values and evaluation . . . . . . . . . . . . 49
5.5.7 Modification of measured values and evaluation . . . . . . . . 50
5.6 Test sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
5.6.1 Description of the test sequence . . . . . . . . . . . . . . . . . 50
5.6.2 Creating a test sequence . . . . . . . . . . . . . . . . . . . . . 50
5.6.3 Assigning a test sequence to appliance . . . . . . . . . . . . . 51
5.6.4 Using the test sequence . . . . . . . . . . . . . . . . . . . . . . 51
6 Instrument main menu 52
6.1 Main menu structure . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.2 Menu - DUT properties . . . . . . . . . . . . . . . . . . . . . . . . . . 52
6.2.1 Menu - Measured values . . . . . . . . . . . . . . . . . . . . . 52
6.2.2 Menu - Visual inspection result . . . . . . . . . . . . . . . . . 52
6.2.3 Menu - Functional test result . . . . . . . . . . . . . . . . . . 52
6.2.4 Menu - Measurement result . . . . . . . . . . . . . . . . . . . 53
6.3 Menu - Test sequences . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.4 Menu - Empty file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.5 Menu - Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6.5.1 Menu - System info . . . . . . . . . . . . . . . . . . . . . . . . 53
6.5.2 Menu - Measure DC values . . . . . . . . . . . . . . . . . . . . 53
6.5.3 Menu - Self-test . . . . . . . . . . . . . . . . . . . . . . . . . . 54
6.5.4 Menu - Date of next calibration . . . . . . . . . . . . . . . . . 54
c
 2018 ILLKO, s.r.o. www.illko.cz Page 3