MDtest (100-140 V) - User’s Manual 1 Introduction
The MDtest is designed to perform electrical safety testing based on:
• IEC 62353:2014
• IEC 60601-1 (only some tests)
1.4 Terms and definitions
Accessible conductive part
The part of the ME equipment (other than the applied part), which is accessible to
the patient, to the operator in contact with the patient or can come in contact with
the patient.
Applied part
The part of the ME equipment that (in normal use) necessarily comes into physical
contact with the patient for ME equipment or an ME system to perform its function.
Mains part
The part of electrical equipment forming a circuit that is intended to be connected
to the supply mains.
Another terms and definitions – see IEC 62353:2014
ID number (ID)
Unique ID number for the DUT.
Hazardous voltage.
Warning concerning a point of danger! Read User’s Manual and
observe all precautions!
Hint, notice.
c
2018 ILLKO, s.r.o. www.illko.cz Page 7
To Next Page
Loading...