MDtest (100-140 V) - User’s Manual 5 Database operations
The data stored in the temporary memory can be displayed after se-
lecting the appropriate quantity. If a memory cell in the temporary
memory is empty, the symbol − − − − is displayed.
5.3 Entering characters
In this mode the text, setting, etc. can be entered and edited. When the keys are
pressed repetitively, the alphanumeric symbols are entered:
[0] 0 space
[1] 1 + − . , _
[2] 2 A B C a b c
[3] 3 D E F d e f
[4] 4 G H I g h i
[5] 5 J K L j k l
[6] 6 M N O m n o
[7] 7 P Q R S p q r s
[8] 8 T U V t u v
[9] 9 W X Y Z w x y z
[*] ∗ : ; = ! ? @ $ % &
[#] # ( ) < > { } [ ] / \
Context button:
[< <] move the cursor left
[> >] move the cursor right
[< Del] backspace
Entry mode can be abandoned:
[ent] confirm entry and returns back
[esc] discard modifications and returns back
5.4 Identification number of device under test (ID)
The ID number is an individual number, which is assigned to only one DUT. An
appliance ID of up to 20 alphanumeric characters can be entered.
The appliance ID can be entered with:
• keypad of MDtest
• barcode scanner
• external USB keyboard (necessary to confirm it by pressing the ENTER key)
c
2018 ILLKO, s.r.o. www.illko.cz Page 46
To Next Page
Loading...