Image Sensing Systems RTMS Echo - Backup;Restore Device Configuration

Chapter 4: Operations and Adjustments
RTMS Echo User Guide ©2019 Image Sensing Systems Inc. 4-53
Backup/Restore Device Configuration
These functions are used to backup the current device configuration or to
restore a previously saved backup file.
The information that is included in the backup file is as follows.
• Setup File Version
• Sensor ID
• Sensor Model
• Firmware Version
• Timestamp when saved
• User Descriptions
• Location
– Location Source
– Latitude
– Longitude
• Data Aggregation Config
–Interval
– Classification lengths
• Data Collection Config
– Drop Inserts When Full (true/false)
• SX300 Protocol
– ID (1)
– Port (2000)
– Push Statistics (true/false)
– Gap or Headway
– Include Speed85 (true/false)
• Detection Config
– Device ID (0)
– Last Modified Date
– Software Version
– Config Version
– Actions
• Sensors
– Sensor Type (Radar)
– Annotations
• Zones
– Zone Type (vertical line zone)
–ID
–Name
–Start
–End