IMC C SERIES User Manual

© 2018 imc Test & Measurement GmbH
imc C-SERIES - Manual, Version 4 R 3 - 2018-10-19
25Firmware Update
Component
Description
Interface
Interface-Firmware (Ethernet)
Booter
Start-up program for the device upon switching-on
Operating system
Device operating system
Online
Online-functions and hard drive controller
Display
Operating system of the connected displays
Field bus
Field bus
Signal conditioners
Amplifiers
The following symbols for the individual firmware components appear in the list:
not current
firmware conforms to current standards
error occurred during update procedure
—
this option is not available on the device
If no status indicators are displayed, no connection could be made to the corresponding device.
The duration of the update depends on the amount of amplifiers (can last up to several minutes). You will
be informed on the progress.
You are notified when the firmware setup concludes successfully, as shown below:
Conclusion of the firmware update (example of a single device)
· Choose Close. The device can now be used with the product software.

IMC C SERIES Specifications

General

Brand	IMC
Model	C SERIES
Category	Measuring Instruments
Language	English