Immergas VICTRIX OMNIA - General Recommendations

4
Dear Customer
Our compliments for having chosen a top-quality Immergas product, able to ensure well-being and safety for a long period of time. As an
Immergas Customer, you can also count on a qualied aer-sales service, prepared and updated to guarantee constant eciency of your
boiler. Read the following pages carefully: you will be able to draw useful tips on the correct use of the device, compliance of which will conrm
your satisfaction with the Immergas product.
For assistance and routine maintenance, contact Authorised Technical Service Centres: they have original spare parts and are specically
trained directly by the manufacturer.
GENERAL RECOMMENDATIONS
is book contains important information for the:
Installer (sec t ion 1);
User (section 2);
Maintenance Technician (sect ion 3).
• e user must carefully read the instructions in the specic section (section 2).
• e user must limit operations on the appliance only to those explicitly allowed in the specic section.
• Every operation carried out on the heat pump (e.g. set up, inspection, installation and commissioning), must mandato-
rily be performed by authorised personnel alone and in possession of a technical engineering or professional degree
qualifying them to perform these tasks. ey must also have attended a refresher course acknowledged by competent
authorities. is particularly applies to personal specialised in C.H. and air-conditioning systems and qualied electri-
cians who, due to their specialised training, skills and experience are experts in the correct installation and mainte-
nance of C.H., cooling and air-conditioning systems.
• e appliance must be installed by qualied and professionally trained personnel.
• e instruction booklet is an integral and essential part of the product and must be given to the new user in the case of transfer
or succession of ownership.
• It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installa-
tion, use and maintenance stages.
• In compliance with the legislation in force, the systems must be designed by qualied professionals, within the dimensional
limits established by the Law. Installation and maintenance must be performed in compliance with the regulations in force,
according to the manufacturer's instructions and by professionally qualied sta, meaning sta with specic technical skills
in the plant sector, as provided for by Law.
• Improper installation or assembly of the Immergas device and/or components, accessories, kits and devices can cause unex-
pected problems for people, animals and objects. Read the instructions provided with the product carefully to ensure proper
installation.
• is instructions manual provides technical information for installing Immergas products. As for the other issues related to
the installation of products (e.g. safety at the workplace, environmental protection, accident prevention), it is necessary to
comply with the provisions of the standards in force and the principles of good practice.
• All Immergas products are protected with suitable transport packaging.
• e material must be stored in a dry place protected from the weather.
• Damaged products must not be installed.
• Maintenance must be carried out by skilled technical sta. For example, the Authorised Service Centre that represents a
guarantee of qualications and professionalism.
• e appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered
improper and therefore potentially dangerous.
• If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, stand-
ards or instructions contained in this booklet (or however supplied by the manufacturer), the manufacturer is excluded from
any contractual and extra-contractual liability for any damages and the device warranty is invalidated.
• In the event of malfunctions, faults or incorrect operation, turn the appliance o and contact an authorised company (e.g. the
Authorised Technical Assistance Centre, which has specically trained sta and original spare parts). Do not attempt to
modify or repair the appliance alone.