42
7 Warranty terms
All information and instructions for the operation and maintenance of the
MICROlight are based on our previous experience and technical expertise to the best of our
knowledge. We reserve the right to make technical modifications within the context of further
development of the equipment described in this Operating Manual.
During the warranty period (1 year), the customer may undertake only those repairs to the
system as described in this Operating Manual. Otherwise the warranty for the entire unit will
become null and void.
All wear items (e.g. bearings, discs, cutting tools and similar) are not covered by the warranty
granted by the manufacturer.
The rubber bellows of the bracing bubble and the stroke drive are also wear items. The
manufacturer does not assume warranty if damage was caused by wear (abrasion, sharp
edged ceramic bodies or similar).
To Next Page
Loading...