Manual de Instalação e Operação
TERM OF CALIBRATION VALIDITY IMS
Dear customer,
We suggest that the equipment returns to IMS for new calibration after 1 (one) year, from
the invoice emission date.
To calibrate its equipments the IMS uses as standard the GAUGE FLUKE 5500A.
Calibrated by an laboratory accredited by INMETRO.
Your equipment was calibrated by the method of direct comparison with the standard.
The obtained results can be supplied in a calibration table. This table relates the values
indicated by the instrument under test, with values obtained through the comparison with the
standards.
SMART CAP 485 60
To Next Page
Loading...