D610 - Check batteries in NC/MMC operating panel on the INDEX C200-4D control and replace
if necessary
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
Orientation
Different types of batteries are installed at various positions of the machine. They
fulfill various tasks. These batteries must be replaced at certain intervals. For the
exact replacement intervals, see the Battery Replacement Intervals label inside the
operating panel.
Be sure to obtain the exact number of batteries and their style or type
from the respective manufacturer documentation.
Label for battery replacement intervals
Requirement
Power off the machine and secure it against power on.
Before replacing the batteries, make sure that spare batteries are at hand. The
change process must be completed within a specified time, otherwise data may be
Maintenance Summary - 4.000 Operating hours
106
Maintenance Instructions
C200
LP1702.10021 - 05.06.2019
To Next Page
Loading...
