Index C200 - D370 - Check and Potentially Replace the End Position Dampers

D490 - Replacing wipers
Orientation
Regular inspection of the wipers prevents damage to the wipers
themselves and to the work area door.
If the work area door can be opened and/or closed only with increased effort, it can
be expected that the wipers are already destroyed by accumulation of chips and
swarf compaction.
Requirement
Example: Chip hook and chip brush
Use appropriate tools to remove coarse chips, chip nests and other debris.
Procedure
1.
Example: 1 Removing chip nest using appropriate tools (e.g., chip hooks)
Maintenance Summary - 4.000 Operating hours
99
Maintenance Instructions
C200
LP1702.10021 - 05.06.2019