A147 - Check work area light (visual inspection)
Orientation
To ensure even illumination of the working areas in the machine, work area lights
are installed in the work area.
They enable safe working and should therefore be checked regularly. Damaged
lighting fixtures must be replaced immediately.
Procedure
1. Check all lamps (visual inspection).
2.
Example: Work area light G200, G300
Check lamp protective glass for damage. If cooling lubricant has already
penetrated into the lamp protective glass of the work area light, the lamp must
be repaired.
Maintenance Summary - Care activities
30
Maintenance Instructions
C200
LP1702.10021 - 05.06.2019
To Next Page
Loading...
