Index C200 - C530 - Check Wipers of Z Axes on Main and Counter Spindles

Maintenance Summary - 4.000 Operating hours
It is recommended to document the maintenance activities carried out by using the appropriate
maintenance log. The maintenance log has the document number LP1702.10031 - 05.06.2019.
D010 - Cleaning of the machine
D020 - Check the pressure accumulator
D050 - Check the lubrication system
D060 - Check the pneumatic system
D090 - Check main and counter spindles
D170 - Check the system for reconditioning the cooling lubricant
D180 - Check fire extinguishing system (visual inspection)
D320 - Replace belts and check belt tension
D350 - Check weight counterbalance (X1 and X2)
D370 - Check and potentially replace the end position dampers
D400 - Replacing hydraulic fluid
D460 - Check blanking plugs of the sliding tracks on the linear guides
D470 - Check wipers of upper telescopic covers
D480 - Replace wipers on the trolleys of the linear guides
D490 - Replacing wipers
D500 - Perform data backup
D520 - Check control cabinet and cable assemblies (visual inspection)
D540 - Check motor protection switch setting and load tap
D610 - Check batteries in NC/MMC operating panel on the INDEX C200-4D control and replace if necessary
D640 - Check setting of electrical fuses
Maintenance Summary - 4.000 Operating hours
68
Maintenance Instructions
C200
LP1702.10021 - 05.06.2019