iNetVu Troubleshooting Guide - 1201 Flyaway
For RF Search Method, the Satellite Configuration and Modem must be exact as provided by
your NOC or Service Provider.
Satellite Transmit Polarization Offset:
• Horizontal Receive Offset = 0
Vertical Receive Offset = 90
The controller and modem must be communicating for RF search
• If using RF search, a valid RF frequency must be entered and is highly recommended. This
can be the service frequency or any other valid RF frequency from a known carrier (preferably
taken from Modem parameters).
• If you are still unable to find satellite via RF search and there are no working DVB Freq. on this
satellite. Attempt to use DVB search with a Reference satellite.
C-COM Technical Support can be contact at
support@c-comsat.com for further assistance.
To Previous Page
Loading...