INFICON Turning On the Instrument and Preparing for Use | 7
074-708-P16A D-TEK Stratus Operating Manual 13 / 394
7 Turning On the Instrument and
Preparing for Use
If the screen does not turn on, the battery is low and needs to be charged. D-TEK
Stratus can be used while charging.
1.
Long press the power button (located on the left side of the body of the
instrument) to turn D-TEK Stratus
On
or
Off
.
ð D-TEK Stratus begins a variable-time warm-up for 45 to 90 seconds. When
warm-up is complete, D-TEK Stratus is ready to use.
2.
To switch modes, press the
MODE
button. This toggles between
Cloud Hunting
,
Pinpoint
and
Manual Zero
modes.
D-TEK Stratus always starts in the last mode that was used.
WARNING
Do not block the exhaust port.
Blocking exhaust air can cause false alarms or readings.
English
English
To Next Page
Loading...
