Inficon D-TEK Stratus - Carbon Dioxide Sensor; Using the CO2 Sensor; CO2 Exposure Safety Warning

18 | Carbon Dioxide Sensor INFICON
26 / 394 074-708-P16A D-TEK Stratus Operating Manual
18 Carbon Dioxide Sensor
An optional CO
2
sensor can be used to search for leaks in refrigeration and air
conditioning applications. To use the CO
2
sensor, remove the standard sensor and
install the CO
2
sensor following the instructions in Removing and Installing the Sensor
[}22]. D-TEK Stratus automatically recognizes the CO
2
sensor and
CO
2
is displayed
on the top bar of the screen the entire time the CO
2
sensor is installed.
While searching for CO
2
leaks, it is recommended to wear a respirator or mask to
avoid exhaling CO
2
toward the probe.
WARNING
Exposure to high concentrations of CO
2
or refrigerants is dangerous and can
be life-threatening.
The instrument is not for use in toxic or hazardous environments. It is not a personal
protection or life-saving device. Always exercise extreme caution in potentially toxic or
hazardous environments.
English
English