3 | Specifications INFICON
6 / 394 074-708-P16A D-TEK Stratus Operating Manual
3 Specifications
Usage indoor/outdoor
Sensor type infrared
Compatible refrigerants all CFCs, HCFCs, HFCs, HFOs, blends
(including A2Ls), and CO2
1
Minimum sensitivity (
Pinpoint
mode,
Super
sensitivity)
0.03 oz/yr (1 g/yr)
2
Display resolution (
Cloud
Hunting
mode) 1 ppm
Display range (
Cloud Hunting
mode) 0 to 9999 ppm
Accuracy (
Cloud Hunting
mode, with
clean air reference, R134a)
±1 ppm ±10% of reading
Battery type lithium ion
Charging input type micro USB
Charging time (starting at 0%) approximately 3 hours
Battery life approximately 8 hours (Cloud Hunting)
approximately 10 hours (Pinpoint)
Input voltage 5 V (dc) ±5%
Input current 1 A ±5%
Warm-up period 45–90 seconds
Temperature ranges and humidity
• Storage -20–60°C (-4–140°F)
• Operating
3
-20–50°C (-4–122°F)
• Charging 0–45°C (32–113°F)
• Humidity 95% RH NC maximum
Altitude 2000 m (6500 ft.)
Pollution degree 2
Overvoltage category 2
Weight (with battery; not including
carrying case or accessories)
1.10 lb. (0.50 kg)
1
The detection of CO
2
requires an optional CO
2
sensor.
2
To achieve optimal performance and the specified sensitivities, it is recommended to
allow D-TEK Stratus to run for 15 minutes prior to use.
3
Use in temperatures below 0°C (32°F) should be limited. Extended warm-up time is
recommended before use in low temperature environments.
English
English
To Next Page
Loading...
