Infineon CYPRESS User Manual

user guide 15 of 38 002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Programming Operations
5 Programming Operations
This chapter covers the various programming operations you can perform using CYP tool.
5.1 Erase Device
1. Connect to the device (see Connect Device).
2. Click the Erase button.
CYP erases the device and displays various messages in the Log. Then, a message in the Status Bar indicates
that the device was erased successfully or that an error occurred.

Infineon CYPRESS Specifications

General

Brand	Infineon
Model	CYPRESS
Category	Motherboard
Language	English