Infineon CYPRESS User Manual

user guide 34 of 38 002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Programming Operations
5.15 How to Recover IoT BT Devices on Failure
If the program operation for an IoT Bluetooth® device fails, it is possible the memory on the board has been
corrupted by a previously loaded application, or the application used a custom baud rate that the download
process does not detect.
To recover from this, it may be necessary to reset the board to factory defaults, as follows:
1. Press and hold the Recovery button (SW1).
2. Press the Reset button (SW2).
3. Release the Reset button (SW2).
4. Release the Recovery button (SW1).

Infineon CYPRESS Specifications

General

Brand	Infineon
Model	CYPRESS
Category	Motherboard
Language	English