Infineon CYPRESS User Manual

user guide 9 of 38 002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Getting Started
3.3 Connect Device
1. If the device is not powered, the status message "Not Powered" is displayed in the Status Bar. Click Power
to power up the device.
2. Click Connect. CYP communicates with the device and displays various messages in the Log. Then, a
message in the Status Bar indicates that it is connected.

Infineon CYPRESS Specifications

General

Brand	Infineon
Model	CYPRESS
Category	Motherboard
Language	English