Infineon CYPRESS

user guide 37 of 38 002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Revision history
Revision history
Date
Version
Description
9/28/18
**
New document.
10/30/18
*A
Updates for Production milestone:
• Various screen captures
• Description of the Platforms pull-down menu
• Description of the Clock option in Probe Settings
7/19/19
*B
Updated to version 2.1.
• Added Verify Regions menu.
• Added JTAG Chain instructions.
• Added Verify Custom Flash Regions section.
10/11/19
*C
List of changes:
• User Guide clean-up in whole document
• Updated section "Features"
• Updated section "Limitations"
• Updated section "Settings"
• Added section "How to Recover IoT BT Devices on Failure"
5/4/20
*D
List of changes:
• Updated to version 3.0
• Updated screenshots across the document
• Made modifications with new features of CYP 3.0
• Added section "Program eFuse Region of PSoC™ 6 MCU"
• Corrected mistakes.
3/18/21
*E
List of changes:
• Updated to version 4.0.
• Updated all sections with new screenshots
• Updated sections "Getting Started", "Settings", "Program PSoC™ 6 MCU in JTAG Chain"
• Added section "Program Chip Protected PSoC™ 4 MCU"
• Corrected mistakes
3/15/22
*F
List of changes:
• Updated to version 4.0.1
• Updated section "Introduction"
• Updated section "Installing CYP"