What to do if the sound is distorted on InFocus P111?
If the sound is distorted, check the audio cable connection. Also, test the source audio output with other speakers. If the issue remains, have the projector serviced.
General| Native Resolution | SVGA (800 x 600) |
|---|---|
| Contrast Ratio | 2000:1 |
| Lamp Life | 3000 hours |
| Inputs | VGA, Composite |
| Keystone Correction | ±15° vertical |
Explains warning symbols used to alert users to hazardous situations and important information.
Guidelines for projector placement, tilt angle, and ventilation for optimal life.
Instructions on power cord usage, battery removal, and safe lamp replacement procedures.
Guidance on cleaning projector parts and proper electronic waste disposal methods.
Lists all items included in the projector package for user verification.
Identifies and labels key components visible from the front-right side.
Details the functions of buttons and status indicators on the projector's top panel.
Identifies and describes all input and output ports on the projector's rear panel.
Shows mounting points and tilt adjustment on the projector's bottom.
Labels and describes each button on the projector's remote control.
Step-by-step instructions for correctly installing batteries in the remote control.
Procedures for powering the projector on and off, including initial setup.
Guide to enable and set a password for unauthorized projector use.
Instructions for leveling the projector using the tilt adjuster for proper image display.
How to adjust image size, sharpness, and correct trapezoid distortion.
Steps to control the audio volume using the remote control's volume buttons.
Explains how to navigate and interact with the projector's on-screen display menus.
Guide to select the preferred language for the on-screen display.
Overview of settings within the Image menu, including Display Mode and Brightness.
Details horizontal, vertical position, frequency, and tracking adjustments for computer input.
Configuration for Brilliant Color, Sharpness, Gamma, Color Temperature, and Video AGC.
Allows adjustment of Red, Green, and Blue gain and offset for color calibration.
Adjusts Hue, Saturation, and Gain for individual colors like Red, Green, Blue, etc.
Covers Source, Projection, Aspect Ratio, Keystone, Digital Zoom, and Audio settings.
Adjusts Volume, Mute status, and Microphone settings for the projector's audio.
Configures Language, Security Lock, Blank Screen, Splash Logo, Closed Captioning, Keypad Lock, and 3D.
Enables and configures 3D modes, sync invert, and format for 3D content viewing.
Includes Test Pattern, H Image Shift, and V Image Shift settings for image adjustments.
Manages Auto Source, No Signal Power Off, Auto Power On, Lamp Mode, Reset All, Status, and Advanced settings.
Displays active source, video information, lamp hours, and software version.
Controls OSD position, translucency, power modes, fan speed, lamp reset, projector ID, and network.
Resets the projector's lamp hour timer after lamp replacement.
Sets up network connection status, DHCP, IP address, subnet mask, gateway, and DNS.
Explains wired LAN capabilities for remote control and monitoring via PC.
Lists compatible controllers like AMX, Extron, and PJLink for projector management.
Steps to connect the projector to a PC using an RJ45 cable and configure network settings.
Using Telnet for serial communication and projector control via the LAN/RJ45 interface.
Detailed procedures and safety warnings for safely replacing the projector's lamp module.
Steps to reset the projector's lamp hour timer to zero after lamp replacement.
Instructions for cleaning the projector lens and exterior case to maintain performance and appearance.
Attaching a security cable via the Kensington slot to prevent unauthorized removal.
Tips for diagnosing and resolving general issues like loose connections or power problems.
Explains the meaning of Power, Lamp, and Temp LED blinking patterns for error diagnosis.
Solutions for common image issues like no display, blur, reversal, streaks, or contrast problems.
Addresses problems with remote response, no sound, or distorted audio output.
Explains differences between Standard and High-Speed HDMI cables and running long cables.
Lists technical details such as model, display type, resolution, and dimensions.
Provides projection distance and size data for XGA resolution.
Provides projection distance and size data for WXGA resolution.
Provides projection distance and size data for 1080p resolution.
Lists supported signal timing modes for various resolutions and sync frequencies.
Visual representation of the projector's physical dimensions with measurements.
Compliance statements for FCC, Canadian ICES, and various safety certifications.
Details serial port settings and RS232 pin assignments for CLI interfacing.
Lists commands for controlling projector functions like power, source, and settings via serial port.
Commands for managing lamp mode, OSD language, and transparency settings.
Commands for changing display modes, sharpness, color tint, and keystone settings.
To Next Page
