Ingenico AXIUM RX7000 - 4_3 Connecting the Terminal to the Host

WARNING
During this operation, it is necessary to be in an ESD protected environment.
As this is not very easy, it is recommended to make this operation using ESD shoes for
example.
4_3 Connecting the terminal to the host
CAUTION
Connecting must be made when power supply unit is not plugged in the cable.
 Flip the terminal. There is one port on the back for power and communications.
 Connect the cable on the terminal.
 Connect the other end to the power supply unit and a Host (PC / cash register…).
 Plug the power supply into the mains.
WARNING
The main port at the back must not be used to connect an HDMI video cable.
Only connect cables provided by Ingenico.
Note : 2 screws can be added (M2.5 x 8) to hold more firmly the cable.
The terminal can be connected to the host by several ways, with optional cables :