Ingenico iCT250 Quick Reference Guide

US$Direct iCT250 Connection to Ethernet
To connect the US$Direct iCT250 to Ethernet:
1. Plug one end of the Ethernet cable into the ETH port on the Magic
Box
2. Plug the other end of the Ethernet cable into an Ethernet jack
US$Direct iCT250 Connection to Power
To connect the US$Direct iCT250 to power:
1. Plug the power supply into the power port on the Magic Box
2. Plug the other end of the power supply into a surge protector
attached to an electrical outlet

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter