Ingenico iCT250 Quick Reference Guide

NOTE:
Use only the DC power supply shipped with your unit.
Using a power supply with the wrong voltage and amps will
damage the device and void the warranty.
Attaching the Privacy Shield (optional)
If you want more privacy for customers while they enter their PINs,
attach a privacy shield to the front of the terminal.
To attach the privacy shield to the US$Direct iCT250 terminal:
1. Remove the adhesive from the back of the privacy shield
2. Firmly press the privacy shield into place around the keypad on the
US$Direct iCT250
18 – Replacing the Paper Roll
When colored stripes appear on a receipt, it is time to change the paper
roll.
NOTE:
Only use paper approved by the manufacturer (roll
diameter max 40 mm/1.57”, roll width 58mm/2 ¼”, roll
length 17m/55’). Using unapproved paper can damage the
terminal’s printer.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter