Ingenico iCT250 Quick Reference Guide

3 – Changing the Terminal Language
1. At the Idle screen, press [F4]
2. The Idle screen is re-displayed in the alternate language (English or
French).
4 – Accepting Payment Cards
To Conduct a Chip Card Transaction
1. Press [Enter] key to enter main menu
2. Select a transaction type and follow the prompts accordingly
3. Position the chip card with the contacts facing upward, as shown
below
4. Insert the chip card into the smart card reader slot in a smooth,
continuous motion until it seats firmly
5. Remove the card only when the terminal indicates to do so.
CAUTION:
Leave the chip card in the terminal until the
transaction is complete. Premature card removal
will invalidate the transaction.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter