Intégration Guide_iUI120 17/58 Copyright © 2013 Ingenico
900016253 R11 000 01/1416 All rights reserved
1.3.3.8 Wake-Up Jack
This connector is used for Wake-up mechanism.
Pin N° Function
1 GND
2
HZ Stand-by authorized
“0” Wake-up / Stand-by unauthorized
WARNING :
The specific jack and cable is a spare part, contact commercial service to purchase it.
Warning: do not plug-in a DC power in the jack. It could damage the iUI120.
1.3.3.9 Bluetooth (optional)
When the iUI120 unit is ordered with Bluetooth option, it must be connected to
an external Bluetooth antenna.
Ingenico can provide an antenna, or a standard one can be used. This standard
Antenna must have an impedance of 50 Ohm and a maximum gain of 0 dBi.
Ingenico recommended antennas:
Antenna
type
manufacturer model gain impedance Minimum
cable
length
Ingenico
Reference
To Next Page