Ingrasys iED N Series User Manual

User’s Manual
postpone is 5 for an alarm, the alarm will NOT activate until the same state has
persisted for 5 seconds. This ruling also applies in reverse so that the alarm has to
stay in inactive state for 5 seconds before the sensor status in recorded as normal.
One or more AI entries been selected and to click , the Modify dialog will appear.
Sensor Name
This field allows the administrator to set “Sensor Name”.
Sensor Mode
This field allows the administrator to set “Sensor Mode” as Voltage or Current or
Disabled.
Display Unit
This field allows the administrator to set Display Unit as Vol. or mA or pH.
Measured Max Scale
This field allows the administrator to set “Measured Max Scale”.
Measured Base Scale
This field allows the administrator to set “Measured Base Scale”.

Ingrasys iED N Series Specifications

General

Brand	Ingrasys
Model	iED N Series
Category	Controller
Language	English