Innco CO3000 - Page 33

Remote Control CO3000
for Innco Systems devices
Document version: v2.10
Date: 2016-06-28
Written by: Thomas Witzenbichler (TW)
Tony Schinkowski (TS)
Valid from CO3000 SW Version: v1.02.60
Document-History
Version Date Author Changes CO3000 Version
v1.0 2012-08-22 TW Initial version v1.01.02
v1.1 2013-01-31 TW Changes GPIB index DS & CT v1.01.10
v1.2 2013-04-16 TW Gantry device added, Correction axis
documentation of XYZ-Positioner
v1.02.01
v1.3 2013-10-04 TW Compound device added. Mast-Rotator added v1.02.08
v1.4 2014-05-20 TW New speed command NSP added v1.02.11
v1.5 2014-07-28 TW Tiltmast (TMP) added
Tiltmast-Slider (TMS) added
v1.02.12
v1.6 2015-05-06 TS VSWR-Compound added v1.02.25
v1.7 2015-05-18 TS Updated Tiltmast (TMP) v1.02.26
v1.8 2015-06-30 TS Added FSM Compound v1.02.33
v1.9 2015-10-05 TS Added STATUS command, see
3.1 General Commands
v1.02.37
v1.10 2015-11-30 TS New Commands for
- Tiltmast (TMP) Antenna-Protection
- Tiltmast (TMP) Auto-Tilt
- Tiltmast (TMP+TMS) Auto-Distance
- VSWR-Compout Auto-Azimuth
- Gantry Antenna-Compensation
v1.02.38
v2.00 2016-06-07 TS Tiltmast (TMP): Reworked Auto-Tilt v1.02.50
v2.10 2016-06-28 TS Tiltmast (TMP): Reworked Auto-Distance v1.02.60
innco systems GmbH
Erlenweg 12
92521 Schwarzenfeld
phone: +49 (0)9435 301659 0
fax: +49 (0)9435 301659 99
e-mail: info@inncosystems.com
© innco systems GmbH Schwarzenfeld/Germany
Erlenweg 12, 92521 Schwarzenfeld/Germany Phone: +49 9435 301659 0 Fax: +49 9435 301659 99
Email: info@inncosystems.com
3