Control Commands
Command Return Value Description
ST 1 Stops all movements in all connected devices
BA 1 Moves the cable measurement section in a positive
direction until the upper limit is reached.
FO 1 Moves the cable measurement section downwards
until its lower limit is reached.
LD ppp CM NP 1 Load ppp cm in Register NP (New Position)
GO 1 Moves the cable measurement section to NP
© innco systems GmbH Schwarzenfeld/Germany
Erlenweg 12, 92521 Schwarzenfeld/Germany Phone: +49 9435 301659 0 Fax: +49 9435 301659 99
Email: info@inncosystems.com
To Next Page
Loading...