- 105 -
Function
Code
Name LED Display Setting Range Min. Unit Default Property
U1-03
Motor speed Motor speed -9999 to 30000 RPM - - ●
U1-04 AI1 voltage AI1 voltage -10.00 to 10.000 V - - ●
U1-05 AI2 voltage AI2 voltage -10.00 to 10.000 V - - ●
U1-06 AI3 voltage AI3 voltage -10.00 to 10.000 V - - ●
U1-07 AI1 zero drift AI1 zero drift -10.00 to 10.000 V - - ●
U1-08 AI2 zero drift AI2 zero drift -10.00 to 10.000 V - - ●
U1-09 AI3 zero drift AI3 zero drift -10.00 to 10.000 V - - ●
U1-10 Reference ow Reference ow 0.00 Hz to maximum
frequency (F0-10)
- - ●
U1-11 Resolver signal
interference degree
Resolver signal
interference degree
0 to 1000 (resolver wire
breaking)
- - ●
U1-12 Oil pressure reference
of host computer
Oil pressure reference
of host computer
0.0 kg to system oil
pressure (A3-02)
- - ●
U1-13 CAN communication
interference status
CAN communication
interference status
0 to 128 (disconnected) - - ●
U1-14 Number of CAN
messages sent
Number of CAN
messages sent
0 to 65535 - - ●
U1-15 Number of CAN
messages received
Number of CAN
messages received
0 to 65535 - - ●
U1-16 CAN buffer use ratio CAN buffer use ratio 0% to 1.00% - - ●
Group A0: Field Weakening and SVC Control Parameters
A0-00 Field weakening control
mode
0: Direct calculation
1: Automatic adjustment
2: Automatic adjustment +
calculation
1 1
★
A0-01 Field weakening current
coefcient
0 to 500 1 5
★
A0-02 Field weakening depth
of PMSM
0% to 50% 1% 5%
★
A0-03 Max. power output
adjustment gain of
PMSM
20% to 300% 1% 100%
★
A0-04 Excitation current
adjustment gain
calculated by PMSM
40% to 200% 1% 4%
★
Group A1: PG Card Parameters
A1-00 PG card type PG card type 0: Resolver
1: Reserved
2: Common ABZ encoder
1 0
★
A1-01 Reserved - - - -
★
To Next Page
Loading...
