Inovance IS580 Series - Page 128

Chapter 10 Appendix IS580 User Manual
- 126 -
Servo Drive Model Solution 3: Require Leakage Current During Running < 200 mA (Wind the Magnetic Ring One
Turn and Use the Safety Capacitance Box).
Magnetic Ring
Model
Installation Wiring Diagram Leakage Protector
Selection
Reserved DY644020H For selection of the safety capacitance box, refer to
the solution 2.
Note: Never run the PE cable around the magnetic
ring together with the RST cable.
IS580
PE
R
S T
Cable
length
<
300 mm
< 300 mm
Cable length
Cxy-1-1
Safety
capacitance box
Wind the
magnetic ring
three turns.
Action current
I△n
s
≥ 100 mA
IS580T035-R1-1 DY805020H
IS580T040-R1-1
IS580T050-R1-1
IS580T070-R1-1
IS580T080-R1-1 DY1207030H
IS580T080-R1-H-1
IS580T100-R1-1
IS580T100-R1-H-1
IS580T140-R1-1
IS580T140-R1-H-1
IS580T170-R1-1 DY1207030H
IS580T170-R1-H-1
IS580T210-R1-1
IS580T210-R1-H-1