Inovance IS580 Series - Appendix B Multi-pump Control; Parallel Pump Control

To Next Page

To Previous Page

IS580 User Manual Chapter 10 Appendix

- 127 -

Servo Drive Model Solution 4: Require Leakage Current During Running Reducing 50% (Wind the Input or

Output Magnetic Ring Three Turns).

Magnetic Ring Model

Installation Wiring Diagram Leakage Protector

Selection

Reserved DY644020H For the wiring diagram of winding the output

UVW cable three turns, for the wiring diagram

in solution 5.

Note: Never run the PE cable around the

magnetic ring together with the RST cable.

IS580

PE R

S T

Cable

length

< 300 mm

Wind the magnetic

ring three turns.

Action current

I△n

≥ 100 mA

IS580T035-R1-1 DY805020H

IS580T040-R1-1

IS580T050-R1-1

IS580T070-R1-1

IS580T080-R1-1 DY1207030H

IS580T080-R1-H-1

IS580T100-R1-1

IS580T100-R1-H-1

IS580T140-R1-1

IS580T140-R1-H-1

IS580T170-R1-1 - - Action current

I△n

≥ 300 mA

IS580T170-R1-H-1

IS580T210-R1-1 - -

IS580T210-R1-H-1

Other manuals for Inovance IS580 Series