Inovance MD300 Series - Page 51

Chapter 5 Function Parameter Table
-49-
Code Name Setup range
Minimum
unit
Factory
default
value
Cha-
nge
F5-10 Fault record type
0: No fault
1: Inverter unit protection
(ERR01)
2: Acceleration over current
(ERR02)
3: Deceleration over current
(ERR03)
4: Constant speed over current
(ERR04)
5: Acceleration over
voltage(ERR05)
6: Deceleration over
voltage(ERR06)
7: Constant speed over
voltage(ERR07)
8: Control power supply
fault(ERR08)
9: Under voltage failure
(ERR09)
10: Inverter overload (ERR10)
11: Motor overload (ERR11)
12: Input phase loss (ERR12)
13: Output phase loss (ERR13)
14: Heatsink over heat(ERR14)
15External fault(ERR15)
16: Reserved
17: Reserved
18: Current detection
fault(ERR18)
19: Motor tuning fault (ERR19)
20: Reserved
21EEPROM˄ERR21˅
22: Inverter hardware
fault(ERR22)
23: Motor to earth short circuit
fault(ERR23)
24: Reserved
- 0 *
efesotomasyon.com